|
Frequently
Asked Questions About Al-pac
1.
Can I do this myself?
The Al-pac was designed with the do-it-yourselfer
in mind. Generally speaking, two to four people
can easily assemble an Al-pac building kit. No building
member is more than 75 lbs** and our bolt-together
design eliminates any welding.
** The 30' & 40' long buildings should be assembled
by a professional builder since a lifting device
is needed.
*** Please be aware that the package that the Al-pac
building kit arrives in weighs from 2500-7500 lbs.
2.
How long does it take to complete the kit?
Your Al-pac arrives ready to be assembled on your
concrete slab or foundation. Assembly time depends
upon building size and the number of options you
have included. An experienced crew can assemble
the Al-pac in two days, and the average person(s)
usually in a couple of weekends.
3.
Can I pour my own concrete slab?
We suggest you have the concrete slab poured
by a professional. Unless you are familiar with
your local building codes, soil conditions, and
have the equipment needed to level the area where
you intend to locate your slab this will be beyond
the average persons capabilities. It is very important
that the foundation be level and the anchor bolts
be installed in the correct locations.
4.
Can I assemble the galvanized structural floor
kit myself?
Yes, but
the galvanized floor
system is easy to assemble, but the I-beam members
(skids) that the system rests upon weigh hundreds
of pounds and you will need assistance (or machinery)
moving and lifting them into place. It is very
important that the foundation be level before you
begin erection of your Al-pac. Because of all of
this, we suggest you have a professional set up
your foundation.
5. Are the 3' X 7' door and two windows shown
in the virtual tour included in the "standard"
Al-pac kit?
No. All doors and windows are options and
not included in the standard Al-pac building kit
except for the 12 x 12 which does include
a 4 x 7 door.
6.
Can I relocate the overhead door?
Not without checking with one of our Technical
Service Representatives. Each building has been
pre-engineered to withstand 110mph wind load and
30psf (or40psf) roof live load. A framed opening
(overhead door) cannot be randomly moved without
affecting the structural integrity of the building.
7.
Does the Al-pac come with the overhead door?
No, at this time we do not provide overhead
doors. We suggest that overhead doors be purchased
and professionally installed by an overhead door
manufacturer (such as Overhead Door Company) due
to the complexity of the task. See www.overheaddoor.com
for your local dealer or check your yellow pages
for a manufacturer 0f your choice.
8.
Can the roof slopes be greater than _ on 1/2 or
2 on 12?
No, this building is a kit and all parts and
pieces have been standardized.
9.
Can the 10' height of the wall be less or greater?
No, this building is a kit and all parts and pieces
have been standardized.
10.
What tools are necessary to assemble the kits?
A complete list of assembly tools is located
in the assembly manual. See Support
Resources for a downloadable assembly manual.
11.
Do you deliver?
Al-pac kits are delivered by several means:
- Motor Freight.
- Factory Pick-Up
- Contract Haulers
12.
How long does it take once the order is placed
to manufacture the building?
The Al-pac ships in 15 working days.
13.
In what colors does it come in?
Hawaiian Blue, Lightstone, Ash Gray, Desert
Sand, Fern Green, Sahara Tan, Rustic Red, Crystal
White, Burnished Slate and Sand Gold.
*We will gladly send you a color chart upon request.
Go to Contact Info to submit
your request.
14.
How much does the Al-pac weigh?
Depending upon size of building and number
of accessories between 2500-7500 lbs.
15.
How long must a trailer be to transport an Al-pac?
The size of your trailer is dependent upon
over-hang restrictions on your route of travel.
Depending on which model you purchase the longest
member in an Al-pac kit is 24 feet.
16.
Can I add on to the building at a later time?
Yes, Al-pac roof extensions and canopy kits
can be added later. Contact us for availabilities.
|